|
| When
you purchase a custom mini bike from
CAP'S, we will sell you parts at
just above dealer cost! Call
Caps and ask about additional savings
on all bikes on this site. Caps has
blowout prices (see our gallery page),
wholesale prices and dealer cost
savings to pass on to you this spring! |
|
|
|
|
|
Caps
Custom Mini Bikes of Connecticut Parts and Accessories |
 |
A
Custom Mini bike is intended for "children" ages
18 and up and is for off road use only, preferably
on smooth surfaces. Be sure to check your local
laws and regulations regarding the use of a Custom Mini Bike.
We offer a limited 90 day warranty on all
Custom Mini Bikes and assume no liability for
usage. Like so many others, we will require a signed Mutual General
Release form prior to delivery.
As always, wear a helmet and protective clothing
when riding your Custom Mini Bike.
Shipping available to anywhere in the USA
($35-85 crate charge with free shipping).
Shipping parts available to anywhere in the
USA ($35-85 crate charge if needed plus
shipping cost). Give us a call and see what's in stock. We
accept phone orders.
203.537.0600
|
|
| Item |
Price |
| Aftermarket
Air Cleaner Adapter and filter |
$39.50 |
| Axle,
Front, M12.0, Stainless Steel |
$17.00 |
| Axle,
Rear, 1.25" Alum, 1/4" keyway |
$20.00 |
| Battery,
Rigid, for the Electric Start |
$49.50 |
| Battery
Hold Down Bracket, Aluminum, Highly
Polished |
$17.50 |
| Battery
Tray, Dressed Rigid only |
$16.00 |
| Bearing
Cassettes for rear axle (pair) |
$35.00 |
| Bearings,
Neck (low speed, pair) |
$4.00 |
| Bearings,
Rear Axle (pair, needs cassettes) |
$23.50 |
| Billet
Wheels, see below |
|
| Blower
housing, chromed (exchange required,
pull start mounts to this housing) |
$140.00 |
| Brake
Adapter Arm for Mast Cylinder (chrome,
replaces stock arm) |
$24.00 |
| Brake
Adapter, base T for front wheel to
fork, Aluminum, polished (holds the
brake hub so that the brakes will work) |
$23.00 |
| Brake
Cable, front (specify chopper or rigid) |
$29.00 |
| Brake
Line, Braided Steel Line Kit |
$55.00 |
| Brake
Line, Standard Nylon (6ft) |
$3.00 |
| Brake
Calipers less pads (pair) |
$69.50 |
| Brake
Pads (pair) |
$37.50 |
| Brake,
Hand Lever, chrome, for 1" bar |
$15.00 |
| Brake
Master Cylinder |
$57.50 |
| Brake
Foot Peg for Adapter Arm, Alum, Highly
Polished |
$17.50 |
| Brake
Rotor, 7.125" Steel |
$30.50 |
| Brake
Rotor Hub |
$24.50 |
| Carrier,
Steel NEW !!! |
$125.00 |
| Chain
Guard, chromed |
$46.50 |
| Engine
Plate |
$10.00 |
| Exhaust
Flange (part to bolt to frame, weld
your own exhaust) |
$10.00 |
| Exhaust,
Rigid, Chromed with Flange |
$125.00 |
| Fender,
Rear, Steel (unpainted/not drilled) |
$65.00 |
| Fender,
Front, Fiberglass (un-painted) |
$35.00 |
| Forks,
Front, (6061 Aluminum, Highly Polished),
Rigid |
$89.50 |
| Forks,
Front, (6061 Aluminum, Highly Polished),
Chopper |
$127.50 |
| Fork
Stabilizer, Chopper, 6061 Aluminum,
Highly Polished |
$57.50 |
| Foot
Pegs, 6061 Alum, 1/2"-20 (Pair,
Highly Polished) |
$45.00 |
| Gas
Cap, Chrome |
$8.00 |
| Gas
Tank (Sportster replacement) |
$115.00 |
| Grip
Set (both grips including throttle
assy/adapters) |
$24.50 |
| Handle
bars (1" drag bars) |
$25.00 |
| Headlight |
$48.00 |
| Hub,
Rear Wheel, 1.25" axle, 4/4 |
$27.00 |
| Jack
Shaft Kit |
$25.00 |
|
|
| Item |
Price |
| Mirror,
chrome |
$20.00 |
| Motor,
6.0hp Tecumseh w/elect start |
$400.00 |
| Neck
Stem, .875" steel, machined |
$14.00 |
| Neck
Tube for frame, 1 3/8" x 1 5/8" |
$12.00 |
| Paint,
tank and fenders only, custom hand
laid flames, tipped in contrasting
color, call for quote |
$475-$875 |
| Petcock,
straight, chrome |
$22.50 |
| Pressure
switch for tag/tail light |
$20.00 |
| Risers,
Aluminum (pair, Highly Polished) |
$95.00 |
| Seat,
Rigid Custom Seat, Black Leather |
$95.00 |
| Solenoid,
for starter |
$10.00 |
| Sprocket,
75 tooth |
$12.50 |
| Sprocket
Hub, Alum, 1.25" bore |
$27.50 |
| Switch,
keyed (for use on electric start bikes) |
$11.00 |
| Throttle
Cable plus barrel ed |
$5.50 |
| TAV2
Cover, chromed, laser engraved |
$240.00 |
| Tire,
treaded 10" dia, 8" wide
205/50-10 |
$65.0 |
| Torque-A-Verter,
Comet, up to 8 hp |
$165.00 |
| Triple
Trees, Up/low, Aluminum (Highly Polished) |
$95.00 |
| Wheel,
Rear, Alum, 10" diam, 8" Wide |
$65.00 |
| Wheel,
Front, 16" diam, with tire/brakes
16x2.25 |
$185.00 |
| Combo
Parts |
|
| Frame,
Rigid (includes rear fender, no tank) |
$550.00 |
| Frame
and Tank, Rigid |
$650.00 |
| Frame,
Tank and Front End, Rigid |
$850.00 |
| Fork
Setup - Rigid (trees, risers, forks,
neck, neck stem,acorn nut, bearings,
all aluminum, all non-polished) |
$295.00 |
| Frame,
Chopper, Complete |
$600.00 |
| Frame
and Tank, Chopper |
$700.00 |
| Frame,
Tank and Front End, Chopper |
$975.00 |
| Fork
Setup - Chopper (trees, risers, forks,
fork stabilizer, neck, neck stem, acorn
nut, bearings, all aluminum, all non-polished) |
$395.00 |
|
|
| Front
End Assy - Rigid, High Polish |
$650.00 |
| (grips,
handlebar, brake lever, brake cable,
risers, triple trees, neck tube, neck
stem, neck bearings, acorn nut, forks,
front wheel, axle, axle adapters) |
|
| Front
End Assy - Chopper, High Polish |
$750.00 |
| (grips,
handlebar, brake lever, brake cable,
risers, triple trees, neck tube, neck
stem, neck bearings, acorn nut, forks,
front wheel, axle, axle adapters, fork
stabilizer) |
|
| Rear
Wheel Assembly, Rigid or Chopper (same) |
$475.00 |
| (
10x8" treaded tire, aluminum wheel/hub,
disc brake/hub, 72 tooth sprocket/hub,
axle, mast cyl, calipers, pads, bearings,
cassettes, and all hardware !! ) |
|
| Tag/tail
Light Kit (bracket, pressure switch,
wiring, instructions) |
$145.00 |
| Electronics
Kit |
$85.00 |
| (battery,
wiring, solenoid/bracket, key switch,
instructions) |
|
|
|
|
|
|
|
|
